SOPREMAPOOL GRIP
SOPREMAPOOL GRIP is a PVC-P synthetic membrane for swimming pools reinforced with polyester scrim, nominal thickness 1.5 mm and with a special non-slip embossed surface. Especially recommended for certain pool areas such as stairs, beach areas and shallow pools.
Description
They are made up of four layers with different and complementary formulations, introducing a reinforcing and perfectly centred polyester mesh between the second and third layers. This reinforcement provides the membrane with great tensile strength and high dimensional stability.
Manufactured with varnish inside by a casting process according to European standard EN 15836-2 (2010).
High resistance to weatherings, UV rays and microorganisms.
SOPREMAPOOL GRIP has been tested for slip prevention according to the European standard EN 13451-1 (according to annex B of EN 15836-2) and DIN 51097 (1992).
Colours and designs:
Light Blue, Azure Blue, Sapphire Blue, Caribbean Green, Natural Green, Sand, White, Light Grey, Medium Grey, Basalt Grey and Black.
Marbella Blue and Bali.
Application:
- For newly built pools or renovation of existing ones.
- On any kind of support: concrete, cement, steel prefab panels.
- On an incompatible support (resins, polystyrene panels etc.), position a special Soprema separation geotextile.
- The pool water temperature must never exceed 32°C.
Warranty:
10 years for waterproofing.
Implementation
Cleaning:
Do not use aggressive products to clean SOPREMAPOOL GRIP as they may damage the liner and remove the decorative surface finishing.
It is advisable to use a soapy water solution and avoid using abrasive products.
Proper water treatment must be ensured for the entire service life of Sopremapool membranes. Check the “Maintenance instructions”.
Videos
Packaging
Roll of 1.65 x 10 m.Storage:
SOPREMAPOOL GRIP is delivered in rolls, laid on wood pallets, protected, separated and externally wrapped with polyethylene sheets.
Rolls should be stored horizontally in their original packages in a dry and warm place (10-30°C). The rolls must be protected against humidity and atmospheric agents (sun, rain, etc.).
Control
Manufactured with varnish inside by a casting process according to European standard EN 15836-2 (2010).SOPREMAPOOL GRIP has been tested for slip prevention according to the European standard EN 13451-1 (according to annex B of EN 15836-2) and DIN 51097 (1992).