SOPREMAPOOL 3D

SOPREMAPOOL 3D

SOPREMAPOOL 3D is a PVC-P synthetic membrane for swimming pools reinforced with polyester mesh, nominal thickness 1.8 mm with special “3D” slightly embossed decorative finishing. SOPREMAPOOL 3D was created with the specific objective of replicating the touch and look of mosaics and natural materials.

Description

THE +
  • Attractive and stylish
  • Easy and quick installation
  • Sensory experience
  • Exclusive varnish integrated in all four layers
  • Varnish coating
  • Exclusive designs
  • Multiple designs

Membranes manufactured by induction with high quality raw materials (resins, plasticisers, stabilisers and pigments).

They are made up of four layers with different and complementary formulations, introducing a reinforcing and perfectly centred polyester mesh between the second and third layers.

This reinforcement provides the membrane with great tensile strength and high dimensional stability.

With exclusive varnish integrated in all four layers and varnished coating for superior protection against UV rays, microorganisms and chlorine.

Manufactured with double varnish (in the PVC paste and on the surface) for maximum protection by a casting process according to European standard EN 15836-2 (2010).

SOPREMAPOOL 3D has been tested for slip prevention according to the European standard EN 13451-1 (according to annex B of EN 15836-2) and DIN 51097 (1992).

Designs:

Sensitive White, Sensitive Grey, Sensitive Black, Sensitive Sand, Sensitive Bali, Sensitive Bali Sand, Sensitive Bali XL and Sensitive Wood.

Application:

  • For newly built pools or renovation of existing ones.
  • On any kind of support: concrete, cement, steel prefab panels.
  • On an incompatible support (resins, polystyrene panels etc.), position a special Soprema separation geotextile.
  • The pool water temperature must never exceed 32°C.

Warranty:

12 years for waterproofing.
3 years for stains caused by bacteria.

Implementation

For SOPREMAPOOL 3D, edge-to-edge welding with hot air Leister devices is recommended. However, you can also use weld overlay while respecting current installation regulations. Clean and dry membrane edges are essential for successful welding.

Cleaning:

Do not use aggressive products to clean SOPREMAPOOL 3D as they may damage the liner and remove the decorative surface finishing.

It is advisable to use a soapy water solution and avoid using abrasive products.

Proper water treatment must be ensured for the entire service life of Sopremapool membranes. Check the “Maintenance instructions”.